Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-331考试是Juniper Networks厂商最热门的科目，其考试的全称为：SEC,Specialist(JNCIS-SEC)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-331培训资料 ,Testinside JN0-331考题讲解, Pass4sure JN0-331题库 , Testking JN0-331考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-331题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-331题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-331考试. examsoon考题大师JN0-331试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-331考试，我们保证您一次轻松通过考试；

JN0-331题库问题与答案赏析

更多信息请访问: JN0-331题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-100考试是Juniper Networks厂商最热门的科目，其考试的全称为：Juniper Networks Certified Internet Associate (JNCIA-JUNOS) 。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-100培训资料 ,Testinside JN0-100考题讲解, Pass4sure JN0-100题库 , Testking JN0-100考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-100题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-100题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-100考试. examsoon考题大师JN0-100试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-100考试，我们保证您一次轻松通过考试；

JN0-100题库问题与答案赏析

免费下载JN0-100认证考题Demo

免费下载JN0-100 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-532考试是Juniper Networks厂商最热门的科目，其考试的全称为：Juniper Networks Certified Internet Specialist, FWV (JNCIS-FWV)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-532培训资料 ,Testinside JN0-532考题讲解, Pass4sure JN0-532题库 , Testking JN0-532考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-532题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-532题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-532考试. examsoon考题大师JN0-532试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-532考试，我们保证您一次轻松通过考试；

JN0-532题库问题与答案赏析

　
　
Exam : Juniper JN0-532
Title : FWV,Specialist(JNCIS-FWV)

1. Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C

2. Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D

3. Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D

4. Which three OSPF parameters are interface parameters? (Choose three.)
A. cost
B. priority
C. neighbor list
D. summarization
E. advertise default route
Answer: ABC

5. Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support PIM-SM? (Choose two)
A. A multicast control policy
B. A bootstrap router process
C. A unicast routing protocol
D. A static RP
Answer: AC

6. To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD

7. Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in the cluster:
Why has failover not occurred?
A. The physical interfaces have not failed.
B. The track-ip interval is not sufficient to cause failover.
C. The track-ip address weight is not sufficient to cause failover.
D. The track-ip address threshold is not sufficient to cause failover.
Answer: C

8. You have entered the command
set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A. If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be captured
B. If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be captured
C. If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will be captured
D. If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will be captured
Answer: C

9. Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched to DataCenter2.
Which statement explains this behavior?
A. SYN checking is enabled in the tunnel.
B. The weight value for the DataCenter2 is too high.
C. VPN monitor is misconfigured in the DataCenter2.
D. Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

10. Review the exhibit.
You’ve been asked to build a route-based hub and spoke network, with policy control for traffic travelling from spoke to spoke. Which two of the following configuration options will meet this requirement? (Choose two.)
A. Place the spoke tunnel interfaces in the trust zone and create policies on the spokes.
B. Place the spoke tunnel interfaces in the untrust zone and create policies on the spokes.
C. Create a single tunnel interface in the trust zone at the hub and enable intra-zone blocking.
D. Create separate tunnel interfaces at the hub and place them in different zones, then create policies at the hub.
Answer: BD

11. Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B

12. Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A. 234.9.8.42
B. 192.168.10.2
C. 192.168.20.10
D. 192.168.20.200
Answer: D

13. Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A. NAT-traversal is enabled.
B. The rekey interval is 8 hours.
C. This device initiated the Phase 1 negotiations.
D. The certificate used in this exchange is set to never expire.
Answer: BC

14. You have created a virtual router called VSYSA-vr and made it shareable. You then create the VSYS using the WebUI, telling it to use an existing VR and selecting the VR called VSYSA-vr.
What is the status of the virtual router after you create the VSYS?
A. The router will be the default router but will no longer be shared.
B. The router will be the default router and will still have a shareable status.
C. The system will not let you use a shared virtual router when you create a new VSYS. The initial virtual router must be private.
D. The system will not create a private vr for the VSYS but will assign the untrust-vr as the default router. The shared Virtual router will not be the default router.
Answer: B

免费下载JN0-532认证考题Demo

免费下载JN0-532 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-141考试是Juniper Networks厂商最热门的科目，其考试的全称为：Juniper Networks Certified Internet Associate, AC (JNCIA-AC)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-141培训资料 ,Testinside JN0-141考题讲解, Pass4sure JN0-141题库 , Testking JN0-141考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-141题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-141题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-141考试. examsoon考题大师JN0-141试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-141考试，我们保证您一次轻松通过考试；

JN0-141题库问题与答案赏析

　
　
Exam : Juniper JN0-141
Title : AC Associate(JNCIA-AC)

1. if Host Checker restrictions are applied at the role level and the Allow access to the role if any ONE of the select policies is passed option is selected, which statement is true?
A. Host Checker must be set to Require and enforce.
B. The role will not be removed if the Host Checker state changes.
C. The endpoint will be assigned the role as long as one policy passes.
D. The endpoint will be assigned the role as long as one rule in the policy passes.
Answer: C

2. What is the function of the Host Checker?
A. Runson the Infranet Controller and ensuresreachability to agents.
B. Communicateswith the overlay enforcer and restrictsaccess to resources.
C. Communicateswith the Infranet Controller and checksendpoint security compliance.
D. Runson the endpoint and checksfor healthy communication with theoverlay enforcer and the Infranet Controller.
Answer: C

3. Of the network access issues listed below, which two are addressed by the UAC solution? (Choose two.)
A. Prevent a host from being infected by a virus.
B. Allow contractors to gain access to some,but not all,network resources.
C. Prevent an authorized user from launching a denial of service attack on company resources.
D. Allow visitors to a branch office to gain Internet access without compromising network security policies.
Answer: BD

4. Your company requires that users who authenticate using the Web run an approved Web browser and have current antivirus signatures to present their credentials for authentication. If they do not have current signatures or are running an unauthorized browser, they cannot authenticate.
What do you configure on the Infranet Controller to implement your company’s authentication policy?
A. abrowser restriction on the user’s role and a Host Checker restriction on the user’s role
B. abrowser restriction on the user’s realm and a Host Checker restriction on the user’s role
C. abrowser restriction on the user’s role and a Host Checker restriction on the user’s realm
D. abrowser restriction on the user’s realm and a Host Checker restriction on the user’s realm
Answer: D

5. What are two ScreenOS commands you can run on the overlay enforcer to troubleshoot communication with the Infranet Controller? (Choose two.)
A. get event
B. get controller status
C. get auth table infranet
D. exec infranet controller connect
Answer: AD

6. What are three functions of the Infranet Controller? (Choose three.)
A. Verifiescompliance with policies.
B. Actsas a 802.1Xenforcer if needed.
C. Assignsroles and resources to users.
D. EnforcesLayer 3 policies dynamically.
E. Maintains communication with client during session.
Answer: ACE

7. You have created a Host Enforcer policy and want to verify that it has been applied.
In which two places would you look to determine if the policy is being enforced? (Choose two.)
A. client browser
B. overlay enforcer
C. Infranet Controller
D. Odyssey Access Client
Answer: CD

8. What kind of security does the UAC solution provide?
A. endpoint security
B. perimeter security
C. network securityon a per-device basis
D. network security on a per-network basis
Answer: C

9. When is it necessary to use the Odyssey Access Client?
A. to perform overlay enforcement
B. to enable 802.1Xsupport on the endpoint
C. to communicate with the Infranet Controller
D. to buildan IPsec tunnel between endpoint and enforcer
Answer: D

10. Which log contains information about service restarts, system errors, warnings, and requests to check server connectivity?
A. Events log
B. System log
C. User Access log
D. Admin Access log
Answer: A

11. What are the three main components of Juniper Networks Unified Access Control (UAC) solution? (Choose three.)
A. Infranet Controller
B. endpoint agent software
C. RADIUS accounting server
D. distributed policy enforcement points
E. intrusion detection and prevention device
Answer: ABD

12. Which statement isaccurate about the integrated Odyssey Access Clientagent?
A. The agent is installed by the Layer 2 enforcer.
B. The agent is installed by the overlay enforcer.
C. The agent isinstalled by the Infranet Controller.
D. The agent communicates with the overlay enforcer in agentless mode.
Answer: C

13. Which statementis true about the operation of the overlay enforcer?
A. It assigns users a set of roles.
B. It enforces resource access policies.
C. It verifies whether an endpointmeets security requirements.
D. It configures the UAC agent to allow or deny access to resources.
Answer: B

14. Which two options must be defined to enable the Infranet Controller to respond to RADIUS requests from an 802.1X-compliant network access device? (Choose two.)
A. a sign-in policy
B. a shared secret
C. the IP address of the network access device
D. the proper vendor-specific attributes for the network access device
Answer: BC

免费下载JN0-141认证考题Demo

免费下载JN0-141 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-522考试是Juniper Networks厂商最热门的科目，其考试的全称为：Juniper Networks Certified Internet Associate, FWV (JNCIA-FWV)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-522培训资料 ,Testinside JN0-522考题讲解, Pass4sure JN0-522题库 , Testking JN0-522考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-522题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-522题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-522考试. examsoon考题大师JN0-522试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-522考试，我们保证您一次轻松通过考试；

JN0-522题库问题与答案赏析

　
　
Exam : Juniper JN0-522
Title : FWV,Associate(JNCIA-FWV)

1. Which statement about multi-cell policies is true?
A. You can apply the negate option to services.
B. You can apply the negate option to a source address.
C. You can only use the WebUI to configure multi-cell policies.
D. You can add up to 32 different addresses or services per cell.
Answer: B

2. The CLI command, ’set policy from untrust to trust "ANY" "ANY" "ANY" Permit’ is the default configuration policy on which NetScreen device?
A. NetScreen 500
B. NetScreen-5XT
C. NetScreen-5XP
D. None of the above
E. NetScreen-200 series
Answer: D

3. Click the Exhibit button.
What does this icon indicate?
A. Logging is enabled on a policy.
B. Counters are enabled on a policy.
C. Scheduling is enabled on a policy.
D. Authentication is enabled on a policy.
Answer: B

4. Which statement is correct regarding administrator privileges?
A. Any Administrator can change their privileges on an as-needed basis
B. Administrator privileges can only be established and changed by the Root Administrator
C. Administrator privileges can be established and changed by the Root and All-privilege Administrator
D. Administrator privileges can only be established by the Root and can be changed by the Root and All-privilege Administrator
Answer: B

5. What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A. There is no need to reconfigure the IP addresses of routers or protected servers.
B. There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C. Policies are easier to create since you do not have to include source and destination IP addresses.
D. The product can support more VPNs and obtain greater throughput because there is less overhead to manage.
Answer: AB

6. Click the Exhibit button.
In the exhibit, on which interface would you configure a VIP for translating inbound traffic destined for the partner servers?
A. E1
B. E2
C. E7
D. E8
E. You cannot use a VIP in this environment; a VIP must be configured in the Untrust zone.
Answer: E

7. Tunnel binding is accomplished during which part of the VPN configuration process?
A. Phase 1
B. Phase 2
C. Route Creation
D. Replay protection
E. Tunnel Interface Creation
Answer: B

8. Which form of NAT performs bi-directional translation?
A. VIP
B. MIP
C. DIP
D. NAT-dst
E. NAT-src
Answer: B

9. Which command is used to avoid IP fragmentation when configuring IPSec on a ScreenOS device?
A. set flow
B. set tcp-mss flow
C. set flow tcp-mss
D. set mss-flow size
Answer: C

10. What are the advantages of multiple virtual routers on a NetScreen device?
A. It creates more secure routing tables that are simpler to administer
B. It reduces packet-forwarding overhead associated with layer-3 operations
C. It increases the number of possible routing table entries per NetScreen device
D. It makes it possible to forward traffic between security zones without a policy lookup
Answer: A

11. What is the default mode for an interface in the trust zone?
A. NAT
B. route
C. Layer 2
D. Layer 3
E. transparent
Answer: A

12. Which two statements are accurate about tunnel mode? (Choose two.)
A. In tunnel mode the IPSec header precedes the original IP header.
B. Tunnel mode is required in IPSec networks where ESP packets are used.
C. Tunnel mode is the default mode of operation for IPSec in ScreenOS devices.
D. Tunnel mode can only be used when operating between IPSec security gateways.
Answer: AC

13. Which statement best describes the ‘config rollback’ feature?
A. Once the ‘config rollback’ feature is enabled; it allows the administrator to re-apply a previously saved configuration file from Flash
B. The ‘config rollback’ feature is enabled by default; it allows the administrator to re-apply a previously saved configuration file from Flash
C. Once the ‘config rollback’ feature is enabled; it allows the administrator to re-apply a locked configuration file from a separate area in Flash
D. Once the ‘config rollback’ feature is enabled; it allows the administrator to revert to the prior ScreenOS image in the event an upgrade operation aborts
E. Once the ‘config rollback’ feature is enabled; it allows the administrator to revert to the prior ScreenOS image or configuration file in the event an upgrade operation aborts
Answer: C

14. Click the Exhibit button.
In the exhibit, you configure NAT-src to translate traffic from the Corporate zone to the Internet zone and do not specify a DIP.
Which address will be used as the outbound source address?
A. 143.45.56.1
B. 143.45.56.254
C. NAT-src requires a DIP
D. the original source address
Answer: A

免费下载JN0-522认证考题Demo

免费下载JN0-522 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-400考试是Juniper Networks厂商最热门的科目，其考试的全称为：EX, Associate (JNCIA-EX)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-400培训资料 ,Testinside JN0-400考题讲解, Pass4sure JN0-400题库 , Testking JN0-400考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-400题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-400题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-400考试. examsoon考题大师JN0-400试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-400考试，我们保证您一次轻松通过考试；

JN0-400题库问题与答案赏析

　
　
Exam : Juniper JN0-400
Title : EX, Associate (JNCIA-EX)

1. Which statement regarding packet flow through an EX-series switch is correct?
A.Transit packets are processed by the Routing Engine.
B.The destination MAC address determines which lookup table is used.
C.The Routing Engine is consulted when processing both transit and host packets.
D.Routing protocol control packets are processed only by the Packet Forwarding Engine.
Answer: B

2. Click the Exhibit button.
Why will the configurations in the exhibit fail to provide gateway redundancy between Switch-1 and Switch-2?
3 Switch-1:
interfaces {
ge-0/0/3 {
unit 0 {
family inet {
address 10.1.1.2/24 {
vrrp-group 100 {
virtual-address 10.1.1.1;
priority 110;
}
}
}
}
}
}
Switch-2:
interfaces {
vlan {
unit 100 {
family inet {
address 10.1.1.3/24 {
vrrp-group 200 {
virtual-address 10.1.1.1;
priority 90;
}
}
}
}
}
A.The IP addresses do not match.
B.The group numbers do not match.
C.The priority numbers do not match.
D.VRRP is not supported between a physical interface and a VLAN interface.
Answer: B

3. Which three functions are performed in the control plane? (Choose three.)
A.protocol updates
B.packet forwarding
C.system management
D.service implementation
E.forwarding table maintenance
Answer: ACE

4. Which two statements describe the EX 4200 switches? (Choose two.)
A.The fan tray used for the EX 4200 switches is not field replaceable.
B.The EX 4200 switches can be interconnected to form a single virtual chassis.
C.The EX 4200 switches support redundant load-sharing AC power supplies.
D.All EX 4200 switches support either partial or full Power over Ethernet (PoE) support.
Answer: BC

5. Click the Exhibit button.
Given the configuration in the exhibit, which command would configure the IP address 10.10.10.1/24 for VLAN 2?
3 interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
vlan {
members v2;
}
}
}
}
ge-0/0/1 {
unit 0 {
family ethernet-switching;
}
}
}
vlans {
v2 {
vlan-id 2;
interface {
ge-0/0/1.0;
}
l3-interface vlan.2;
}
}
A.set vlans v2 family inet address 10.10.10.1/24
B.set interfaces vlan v2 family inet address 10.10.10.1/24
C.set interfaces vlan unit 2 family inet address 10.10.10.1/24
D.set interfaces ge-0/0/1 unit 0 family inet address 10.10.10.1/24
Answer: C

6. What are two components of the JUNOS software architecture? (Choose two.)
A.multiple software processes
B.separation of control and forwarding planes
C.shared memory environment for all processes
D.efficient processing of all packets through the control plane
Answer: AB

7. On an EX-series switch, what information is gathered when building a bridge table? (Choose two.)
A.interface
B.IP address
C.MAC address
D.authentication information
Answer: AC

8. Which two are included in the EZsetup configuration for EX-series switches? (Choose two.)
A.Configure syslog servers.
B.Configure routing protocols.
C.Configure root authentication.
D.Configure me0 management Ethernet port.
Answer: CD

9. You are configuring the voice VLAN feature on an EX-series switch on interface ge-0/0/5.
Which configuration would you use?
A.ethernet-switching-options { voice-vlan { interface ge-0/0/5.0 { vlan voice-over-ip; forwarding-class expedited-forwarding; } }}
B.ethernet-switching-options { voip { interface ge-0/0/5.0 { member-vlan voice-over-ip; forwarding-class expedited-forwarding; } }}
C.ethernet-switching-options { voip { interface ge-0/0/5.0 { vlan voice-over-ip; forwarding-class expedited-forwarding; } }}
D.ethernet-switching-options { voice-vlan { interface ge-0/0/5.0 { member-vlan voice-over-ip; forwarding-class expedited-forwarding; } }}
Answer: C

10. What are two features of JUNOS software? (Choose two.)
A.JUNOS facilitates separate control and forwarding planes.
B.All processes use shared memory to make efficient use of available resources.
C.The functionality of JUNOS is made possible through multiple processes that are dependant on each other.
D.All processes run in their own protected memory space to prevent against complete system failure when a single process fails.
Answer: AD

11. Which two statements describe the EX 3200 switches? (Choose two.)
A.The single-blower fan tray used for the EX 3200 switches is field replaceable.
B.The EX 3200 switches can be interconnected to form a single virtual chassis.
C.The redundant AC power supply units on the EX 3200 switches are hot swappable and load sharing.
D.The EX 3200 switches support either 4-port 1-Gigabit Ethernet or 2-port 10-Gigabit Ethernet uplink modules.
Answer: AD

12. Which two major components make up the control and forwarding planes for an EX-series switch? (Choose two.)
A.Routing Engine
B.Switching Engine
C.Switching Fabric Module
D.Packet Forwarding Engine
Answer: AD

13. Within a virtual chassis, which type of switch maintains the forwarding table?
A.line card
B.master switch
C.routing switch
D.forwarding switch
Answer: B

14. Which two statements regarding packet flow through an EX-series switch are correct? (Choose two.)
A.Transit packets are processed by the Routing Engine.
B.The destination MAC address determines which lookup table is used.
C.If the egress port belongs to the ingress Packet Forwarding Engine, the packet is switched locally.
D.If the egress port belongs to a remote Packet Forwarding Engine, the Routing Engine is consulted prior to forwarding the packet.
Answer: BC

免费下载JN0-400认证考题Demo

免费下载JN0-400 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-321考试是Juniper Networks厂商最热门的科目，其考试的全称为：DX, Associate(JNCIA-DX)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-321培训资料 ,Testinside JN0-321考题讲解, Pass4sure JN0-321题库 , Testking JN0-321考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-321题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-321题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-321考试. examsoon考题大师JN0-321试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-321考试，我们保证您一次轻松通过考试；

JN0-321题库问题与答案赏析

更多信息请访问: JN0-321题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-341考试是Juniper Networks厂商最热门的科目，其考试的全称为：ER.Associate(JNCIA-ER)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-341培训资料 ,Testinside JN0-341考题讲解, Pass4sure JN0-341题库 , Testking JN0-341考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-341题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-341题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-341考试. examsoon考题大师JN0-341试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-341考试，我们保证您一次轻松通过考试；

JN0-341题库问题与答案赏析

　
　
Exam : Juniper JN0-341
Title : Juniper ER.Associate(JNCIA-ER)

1. What are two functions of the Intel IXP processors? (Choose two.)
A. keepalives
B. route-lookup
C. CRC validation
D. Layer 2 decapsulation
Answer: AC

2. Which statement describes how transit packets are handled on a J-series router?
A. They are only examined by the PICs.
B. They are treated the same as host packets.
C. They are processed by the forwarding daemons.
D. They are reassembled into ATM cells across the router.
Answer: C

3. What are three methods for managing a Juniper Enterprise Router? (Choose three.)
A. CLI
B. SDX
C. SAP
D. J-Web
E. J-Config
Answer: ABD

4. What are two methods of accessing a Juniper enterprise router? (Choose two)
A. RSH
B. HTTPS
C. console
D. J-Config
Answer: BC

5. What is shown by the command show interfaces extensive fe-0/0/0 but not shown by the command show interface detail fe-0/0/0?
A. input error counter
B. interface MTU size
C. input packets counter
D. the IP address on logical interface fe-0/0/0.0
Answer: A

6. Which two routers have multiple fixed Ethernet interfaces and support field-replaceable Physical Interface Cards/Modules? (Choose two.)
A. M7i
B. M10i
C. J2300
D. J4350
Answer: AD

7. Which two components of the JUNOS software architecture are found on all Juniper enterprise routers? (Choose two.)
A. multiple software daemons
B. separation of control and forwarding
C. separate management interface (fxp0)
D. Application Specific Integrated Circuits (ASICs)
Answer: AB

8. Which predefined login class allows a user to issue show, clear, and reset commands, but does not allow the user to configure the router?
A. noc
B. operator
C. read-only
D. super-user
Answer: B

9. How many fixed Fast Ethernet ports are on a J2300 router?
A. 0
B. 1
C. 2
D. 4
Answer: C

10. Within the J-Web initial setup wizard, which menu is used to configure a password for individual network administrators who must access the router?
A. Users
B. Set Up
C. Routing
D. Interfaces
Answer: A

11. Which CLI command is used to remove configuration portions from the router?
A. no
B. undo
C. delete
D. remove
Answer: C

12. In which order are routing policy terms evaluated?
A. alphabetical
B. best match first
C. numerical (lowest to highest)
D. in the order listed in the configuration
Answer: D

13. On a J-series router, where is the JUNOS software located?
A. EPROM
B. Zip drive
C. hard drive
D. compact flash
Answer: D

14. Which J-Web menu is used to configure a single area OSPF configuration?
A. Configuration > OSPF Routing
B. Configuration > OSPF Routing > Single Area
C. Configuration > Routing and Protocols > OSPF Routing
D. Configuration > Quick Configuration > Routing and Protocols > OSPF Routing
Answer: D

免费下载JN0-341认证考题Demo

免费下载JN0-341 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

jn0-541考试是Juniper Networks厂商最热门的科目，其考试的全称为：IDP, Associate(JNCIA-IDP)。在此我们收集了不同题库供应商的真题集 包含 : examsoon jn0-541培训资料 ,Testinside jn0-541考题讲解, Pass4sure jn0-541题库 , Testking jn0-541考试指南, exam4sure 真题材料.只要仔细阅读以下的jn0-541题库demo的问题和答案, 相信你就会知道这个题库的质量了。

jn0-541题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks jn0-541考试. examsoon考题大师jn0-541试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加jn0-541考试，我们保证您一次轻松通过考试；

jn0-541题库问题与答案赏析

　
　
Exam : Juniper JN0-541
Title : Juniper IDP, Associate(JNCIA-IDP)

1. Which three statements are true as they relate to a transparent mode IDP deployment? (Choose three.)
A. Can actively prevent attacks on all traffic.
B. An IP address must be defined on each forwarding interface.
C. Can be installed in the network without changing IP addresses or routes.
D. Uses paired ports, such that packets arriving on one port go out the other associated port.
Answer: ACD

2. What is "a deviation from a protocol’s expected behavior or packet format"?
A. context
B. attack signature
C. protocol anomaly
D. compound attack object
Answer: C

3. You want Enterprise Security Profiler (ESP) to generate a message when a new host is detected on a network.
Which two steps must you perform? (Choose two.)
A. Start or restart the profiler process.
B. Configure ESP to enable alerts for new host detected.
C. Configure ESP to enable application profiling, and select the contexts to profile.
D. Under the Violation Viewer tab, create a permitted object, select that object, and then click Apply.
Answer: AB

4. Which OSI layer(s) of a packet does the IDP sensor examine?
A. layers 2-4
B. layers 2-7
C. layers 4-7
D. layer 7 only
Answer: B

5. Which TCP port is used for communication between Security Manager and an IDP sensor?
A. 443
B. 7800
C. 7801
D. 7803
Answer: D

6. Which two statements are true as they relate to a sniffer mode IDP sensor deployment? (Choose two.)
A. An IP address must be assigned to the sniffer interface.
B. It does not affect the performance or availability of the network.
C. It provides passive monitoring only with limited attack prevention.
D. IDP sensor cannot be managed by Security Manager in sniffer mode. IDP sensor cannot be managed by Security Manager in sniffer mode.
Answer: BC

7. Given the following steps:
Which order is correct when initially deploying a sensor in a network?
A. a, e, d, c, f, b
B. e, a, d, b, f, c
C. e, a, d, c, b, f
D. b, f, e, a, d, c
Answer: B

8. In which three situations would you create a compound attack object? (Choose three.)
A. When attack objects must occur in a particular order.
B. When one of the attack objects is a protocol anomaly.
C. You have at least two attack objects that define a single attack.
D. When the pattern needs to be defined using a stream 256 context.
E. When the pattern "@@@@@@@@" and context "ftp-get-filename" completely define the attack.
Answer: ABC

9. Which interface does IDP use to communicate with Security Manager?
A. eth0
B. eth1
C. HA port
D. console port
Answer: A

10. Which TCP port is used for communication between ACM and an IDP sensor?
A. 80
B. 443
C. 7800
D. 7801
Answer: B

11. You implement Traffic Anomaly detection and you find numerous alerts of port scans from your security auditing team that you want to ignore. You create an address book entry for the security audit team specifying the IP addresses of those machines.
What should you do next?
A. Create a rule at the top of the Traffic Anomaly rulebase to ignore traffic from security audit team.
B. Create an exempt rule for the security audit team in the Exempt rulebase to ignore Traffic Anomalies.
C. Create a rule at the top of the IDP rulebase to ignore traffic from security audit team, and make this a terminal rule.
D. Create a rule at the top of the Traffic Anomaly rule base to ignore traffic from security audit team, and make this a terminal rule.
Answer: A

12. If the power is lost to an IDP sensor, which feature allows the traffic to continue to flow through the device?
A. NIC bypass
B. stateful inspection
C. peer port modulation
D. protocol anomaly detection
Answer: A

13. Which three functions does the IDP sensor perform? (Choose three.)
A. detects new hosts on the network
B. displays logs in Security Manager GUI
C. performs attack detection and prevention
D. forwards logs and status messages to Security Manager server
Answer: ACD

14. Click the Exhibit button.
In the exhibit, which sensor command would have produced this display?
A. sctop "t" option
B. sctop "s" option
C. scio policy list s0
D. scio subs qmodules s0
Answer: A

免费下载jn0-541认证考题Demo

免费下载jn0-541 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

jn0-130考试是Juniper Networks厂商最热门的科目，其考试的全称为：juniper networks certified internet specialist.e(jncis-e)。在此我们收集了不同题库供应商的真题集 包含 : examsoon jn0-130培训资料 ,Testinside jn0-130考题讲解, Pass4sure jn0-130题库 , Testking jn0-130考试指南, exam4sure 真题材料.只要仔细阅读以下的jn0-130题库demo的问题和答案, 相信你就会知道这个题库的质量了。

jn0-130题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks jn0-130考试. examsoon考题大师jn0-130试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加jn0-130考试，我们保证您一次轻松通过考试；

jn0-130题库问题与答案赏析

　
　
Exam : Juniper JN0-130
Title : Juniper(r) Juniper Networks Certified Internet Specialist.e(JNCIS-E)

1. Which command is used to execute a macro called setup.mac
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

2. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

3. A customer’s application requires 30 virtual paths on a four port OC3 card. Which command allows this functionality?
A. atm vp 30
B. atm vc-per-vp 30
C. atm vc-per-vp 32768
D. atm vp-per-vc 32768
Answer: C

4. Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

5. Log messages are appearing very quickly on the console of your ERX Edge Router. Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

6. What two BGP attributes are incorporated for loop prevention within an AS using a route reflection configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
E. Reflector List
Answer: CD

7. Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

8. In a Bridged 1483 network, which CLI commands are used to baseline an IP interface on ATM 6/1.1 and display recent IP transmit and receive statistics?
A. clear ip interface atm 6/1.1
show ip interface atm 6/1.1
B. baseline atm interface atm 6/1.1
show ip interface atm 6/1.1
C. clear ip interface atm 6/1.1
show ip interface atm 6/1.1 delta
D. baseline atm interface atm 6/1.1
show ip interface atm 6/1.1 delta
Answer: C

9. Your ERX Edge Router is constantly going to a boot## prompt. What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
E. bad line module
Answer: D

10. Which command displays the results of a loopback test you executed on a CT3 line module in slot 5, port 0, t1 number 4?
A. show interface 5/0:4
B. show interface 5/0:4/1
C. show controllers t3 5/0:4
D. show controllers t3 5/0:4/1
Answer: C

11. Which CLI command displays FECN and BECN information on a Frame Relay interface configured on serial interface 4/0:3/1
A. show frame-relay pvc
B. show frame-relay summary
C. show frame-relay subinterface
D. show frame-relay interface serial 4/0:3/1
Answer: A

12. Which command generates a BERT test pattern of alternating ones and zeros on T1 number 1 for one minute?
A. t1 1 bert pattern alt01 interval 1
B. t1 1 bert pattern alt01 interval 60
C. t1 1 bert pattern alt-0-1 interval 1
D. t1 1 bert pattern alt-0-1 interval 60
Answer: C

13. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

14. You would like to configure an Ethernet interface with the following characteristics:
Fast Ethernet port 3/1
10.10.10.1/24
VLAN 100
Which set of configuration commands accurately completes this task?
A. interface fastEthernet 3/1
vlan id 100
encap vlan
ip address 10.10.10.1 255.255.255.0
B. interface fastEthernet 3/1
ip address 10.10.10.1 255.255.255.0
encap vlan
vlan id 100
C. interface fastEthernet 3/1
encap vlan
interface fast 3/1.1
vlan id 100
ip address 10.10.10.1
255.255.255.0
D. interface fastEthernet 3/1
interface fast 3/1.1
encap vlan
vlan id 100
ip address 10.10.10.1 255.255.255.0
Answer: C

免费下载jn0-130认证考题Demo

免费下载jn0-130 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

jn0-201考试是Juniper Networks厂商最热门的科目，其考试的全称为：juniper networks certified internet associate.m(jncia-m)。在此我们收集了不同题库供应商的真题集 包含 : examsoon jn0-201培训资料 ,Testinside jn0-201考题讲解, Pass4sure jn0-201题库 , Testking jn0-201考试指南, exam4sure 真题材料.只要仔细阅读以下的jn0-201题库demo的问题和答案, 相信你就会知道这个题库的质量了。

jn0-201题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks jn0-201考试. examsoon考题大师jn0-201试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加jn0-201考试，我们保证您一次轻松通过考试；

jn0-201题库问题与答案赏析

　
　
Exam : Juniper JN0-201
Title : Juniper(r) Networks Certified Internet Associate.m(Jncia-M)

1. Which ASIC is responsible for segmenting a packet into 64-byte J-Cells?
A.PIC I/O ASIC
B.I/O Manager ASIC
C.Buffer Manager ASIC
D.Internet Processor ASIC
Answer: B

2. For which two functions is the Routing Engine responsible? (Choose two.)
A.packet forwarding
B.queuing functions
C.routing protocol control
D.JUNOS software operation
Answer: CD

3. A network administrator would like to verify the active alarms on interface so-0/0/0.0. Which command displays this information?
A.show alarms
B.show interfaces terse
C.show alarms extensive
D.show interfaces extensive
Answer: D

4. Which two statements are true concerning the JUNOS software? (Choose two.)
A.Processes are tightly integrated with each other.
B.Processes are fully independent from each other.
C.Processes run in a protected memory environment.
D.Processes may fail and cause a failure of the entire system.
Answer: BC

5. On which ASIC is queuing performed?
A.Incoming I/O Manager ASIC
B.Outgoing I/O Manager ASIC
C.Incoming Buffer Manager ASIC
D.Outgoing Buffer Manager ASIC
Answer: B

6. Router A has a priority of 64, Router B has a priority of 0, and Router C has a priority of 70. Router D now comes online with a priority of 100.
Which router is the DIS?
A.Router A
B.Router B
C.Router C
D.Router D
Answer: D

7. Which two routes may be advertised via EBGP? (Choose two.)
A.routes that originate on the local router and are injected using policy
B.routes that do not originate in the local AS and are learned by OSPF
C.routes that originate on the local router and are from protocol aggregate
D.routes that are transiting the local router and are from protocol BGP
Answer: AD

8. Which path will a packet follow within a Juniper Networks router after it enters an interface and before a forwarding table lookup is performed?
A.PIC I/O Manager, Buffer Manager, I/O Manager, Internet Processor
B.PIC I/O Manager, Buffer Manager, Internet Processor, I/O Manager
C.PIC I/O Manager, I/O Manager, Buffer Manager, Internet Processor
D.PIC I/O Manager, I/O Manager, Internet Processor, Buffer Manager
Answer: C

9. Given the following configuration:
interfaces {
so-0/0/0 {
unit 0 {
family inet {
address 10.10.10.1/24;
}
}
}
so-0/0/1 {
unit 0 {
family inet {
address 20.20.20.1/24;
}
}
}
lo0 {
unit 0 {
family inet {
address 192.168.1.1/32;
}
}
}
}
Which is considered an exception packet?
A.IP packet addressed to 10.100.100.10
B.IP packet with the Router Alert option set
C.ICMP traceroute packet with TTL set to 5
D.ICMP echo request addressed to 172.16.1.1
Answer: B

10. Which command ensures that a configuration file on a backup Routing Engine is identical to the file on the primary Routing Engine?
A.commit check
B.commit and-quit
C.commit confirmed
D.commit synchronize
Answer: D

11. Which ASIC is responsible for transmitting a routed packet out an interface?
A.PIC I/O ASIC
B.I/O Manager ASIC
C.Buffer Manager ASIC
D.Internet Processor ASIC
Answer: A

12. What is the purpose of the OSPF link-state update packet?
A.describes a change to the OSPF hello timer
B.carries one or more link-state advertisements
C.establishes and maintains neighbor relationships
D.describes the contents of the entire link-state database
Answer: B

13. Which protocol family is required prior to assigning an IP address to an interface?
A.family ip
B.family ip6
C.family inet
D.family inet4
Answer: C

14. What are three characteristics of RIP? (Choose three.)
A.uses Bellman-Ford algorithm
B.uses hop count as the metric
C.supports maximum allowable hop count of 15
D.floods updates to all RIP routers in the network
E.sends updates only when a route metric changes
Answer: ABC

免费下载jn0-201认证考题Demo

免费下载jn0-201 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

jn0-120考试是Juniper Networks厂商最热门的科目，其考试的全称为：juniper networks certified internet associate.e(jncia-e)。在此我们收集了不同题库供应商的真题集 包含 : examsoon jn0-120培训资料 ,Testinside jn0-120考题讲解, Pass4sure jn0-120题库 , Testking jn0-120考试指南, exam4sure 真题材料.只要仔细阅读以下的jn0-120题库demo的问题和答案, 相信你就会知道这个题库的质量了。

jn0-120题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks jn0-120考试. examsoon考题大师jn0-120试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加jn0-120考试，我们保证您一次轻松通过考试；

jn0-120题库问题与答案赏析

　
　
Exam : Juniper JN0-120
Title : Juniper (r) Networks Certified Internet Associate.E(JNCIA-E)

1. What protocol is used between the RAS and the authentication server in a narrowband network environment?
A.RADIUS
B.PPP PAP
C.MS CHAP
D.PPP CHAP
Answer: A

2. How many spare line modules are supported for each redundancy group?
A.1
B.2
C.3
D.5
Answer: A

3. The primary line module has failed and the spare line module is now active. What occurs, by default, when the primary line module returns to an operational status?
A.The primary line module is inactive for five minutes and then becomes active.
B.The primary line module is in standby mode, while the spare line module remains active.
C.The primary line module becomes active immediately and the spare line module becomes inactive.
D.The primary and spare line modules are active for five minutes, after which time the spare line module becomes inactive.
Answer: B

4. How does the ERX Edge Router interact with an external DHCP server in a Bridged 1483 network?
A.It maintains DHCP leases on behalf of subscribers.
B.It initiates DHCP requests on behalf of subscribers.
C.It passes DHCP traffic to and from the server; you must configure static host routes.
D.It passes DHCP traffic to and from the server and inserts host routes into its routing table.
Answer: D

5. Where should you install the spare line module in a redundancy group?
A.last slot in the chassis
B.first slot in the chassis
C.lowest numbered slot in the group
D.highest numbered slot in the group
Answer: C

6. In a Routed 1483 network what method of routing is typically employed on the DSL router?
A.static
B.OSPF
C.RIPv1
D.RIPv2
Answer: A

7. Which statement describes the function of the LNS in a L2TP environment?
A.It initiates both the PPP session and the tunnel.
B.It initiates the PPP session and terminates the tunnel.
C.It terminates the PPP session and initiates the tunnel.
D.It terminates the PPP session and terminates the tunnel.
Answer: D

8. Which configuration command specifies that the software file named 4-0-0.rel is used at the next router reload?
A.boot file 4-0-0.rel
B.boot image 4-0-0.rel
C.boot system 4-0-0.rel
D.boot release 4-0-0.rel
Answer: C

9. How are the slot groups arranged in the ERX 700 Series Edge Router?
A.Group 1 – Slots 0 &1
Group 2 – Slot 2
Group 3 – Slot 3
Group 4 – Slot 4
B.Group 1 – Slots 2 & 3
Group 2 – Slot 4
Group 3 – Slot 5
Group 4 – Slot 6
C.Group 1 – Slot 2
Group 2 – Slot 3
Group 3 – Slot 4
Group 4 – Slot 5 & 6
D.Group 1 – Slot 3
Answer: B

10. Which ERX Edge Router component is responsible for all packet processing and packet forwarding?
A.I/O adapter
B.line module
C.shared memory fabric
D.switch route processor
Answer: B

11. Which configuration command allows the router to utilize a RADIUS server to authenticate incoming Telnet users?
A.aaa new-model
B.aaa telnet login
C.telnet authentication login
D.authentication telnet login
Answer: A

12. Which key activates the command completion function in the router’s CLI?
A.Tab
B.Enter
C.Spacebar
D.Question mark
Answer: A

13. What configuration command dynamically detects and configures a Routed 1483 interface?
A.auto-configure ip
B.auto-configure ppp
C.auto-configure pppoe
D.auto-configure bridgedethernet
Answer: A

14. In a DSL network, what device terminates the PPP over Ethernet subscriber’s two-wire phone line?
A.RAS
B.DSLAM
C.ATM switch
D.RADIUS server
Answer: B

免费下载jn0-120认证考题Demo

免费下载jn0-120 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

JN0-340考试是Juniper Networks厂商最热门的科目，其考试的全称为：Juniper Networks Certified Internet Associate, J-series (JNCIA-J)。在此我们收集了不同题库供应商的真题集 包含 : examsoon JN0-340培训资料 ,Testinside JN0-340考题讲解, Pass4sure JN0-340题库 , Testking JN0-340考试指南, exam4sure 真题材料.只要仔细阅读以下的JN0-340题库demo的问题和答案, 相信你就会知道这个题库的质量了。

JN0-340题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks JN0-340考试. examsoon考题大师JN0-340试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加JN0-340考试，我们保证您一次轻松通过考试；

JN0-340题库问题与答案赏析

　
　
Exam : Juniper JN0-340
Title : Juniper Networks Certified Internet Associate, J-series (JNCIA-J)

1. Within the J-Web initial setup wizard, which menu is used to configure community and trap group information for the router?
A. Users
B. Set Up
C. SNMP
D. Interfaces
Answer: C

2. The use of NAT can break the operation of protocols which signal dymanic port numbers within the packet flow. Which technology can be used in a NAT configuration to solve this problem?
A. Stateful firewall
B. Intrusion detection
C. Port address translation
D. Application layer gateways
Answer: D

3. When configuring an IPSec tunnel on a J-series router, which two options are required? (Choose two.)
A. IKE secret key
B. Encryption algorithm
C. Remote tunnel hostname
D. Remote tunnel endpoint address
Answer: AD

4. Which J-Web menu is used to view the current NAT pools being used on the router?
A. Monitor -> NAT
B. Manage -> NAT
C. Diagnose -> NAT
D. Configuration -> NAT
Answer: A

5. Which two statements accurately reflect the operation of a packet filter on a J-series router? (Choose two.)
A. It maintains protocol state
B. It does not maintain protocol state
C. It processes packets independently of a particular flow
D. It processes packets within the context of a particular flow
Answer: BC

6. The router is attempting to perform autoinstallation using interface fe-0/0/0 , but has had three unsuccessful attempts. What is the next step it performs?
A. It shuts down all of its interfaces
B. It activates DHCP in server mode
C. It waits 30 seconds and then tries again
D. It reboots itself and attempts autoinstallion again
Answer: B

7. A J-series router can classify packets using which three methods? (Choose three.)
A. Evil bit
B. 802.1P
C. IP DSCP
D. MLPPP bundle
E. Multifield classifier
Answer: BCE

8. You are in the Configuration -> Quick Configuration -> Set Up menu of the J-Web application. Which two fields must be filled in before the router will commit any changes? (Choose two).
A. Hostname
B. Root password
C. DNS name server
D. Loopback address
Answer: AB

9. Which of the following loads a factory default configuration onto your router if you do not have access to the router CLI?
A. Press the power button for less than 5 seconds
B. Press the power button for more than 5 seconds
C. Press the configuration button for less than 5 seconds
D. Press the configuration button for more than 5 seconds
Answer: D

10. The built-in service module on a J-series router supports which two service types? (Choose two.)
A. NAT
B. L2TP
C. IPSEC
D. SSL VPN
Answer: AC

11. What is one way to activate the rescue configuration on a J-series router?
A. Issue the load rescue command
B. Issue the activate rescue command
C. Press the rescue button for less than 5 seconds
D. Press the configuration button for less than 5 seconds
Answer: D

12. How do you disable the autoinstallation functionality on a J-series router?
A. Return the router to the factory default configuration
B. Reboot the router using the removable PCMCIA flash
C. Remove the autoinstallation configuration from the router
D. Compress the configuration button for more than 5 seconds
Answer: C

13. Which J-series router process is responsible for performing autoinstallation?
A. rpd
B. dhcpd
C. autod
D. slarpd
Answer: C

14. A stateful firewall on a J-series router is applied to which interface?
A. WAN interface
B. Trusted interface
C. Loopback interface
D. Untrusted interfaace
Answer: D

免费下载JN0-340认证考题Demo

免费下载JN0-340 PDF题库

Examsoon 的优势

1.Examsoon 模拟测试题具有最高的专业技术含量，只供具有相关专业知识的专家和学者学习和研究之用。
2.该测试已取得试题持有者和第三方的授权，我们深信IT业的专业人员和经理人有能力保证被授权产品的质量。
3.如果你使用 Examsoon 模拟测试，我们将保证你的第一次参加考试即取得成功，否则，我们将全额退款！
4.提供每种产品免费测试。在您决定购买之前，请检测联接，可能存在的问题及试题质量和适用性.

jn0-531考试是Juniper Networks厂商最热门的科目，其考试的全称为：FWV, Specailist(JNCIS-FWV)。在此我们收集了不同题库供应商的真题集 包含 : examsoon jn0-531培训资料 ,Testinside jn0-531考题讲解, Pass4sure jn0-531题库 , Testking jn0-531考试指南, exam4sure 真题材料.只要仔细阅读以下的jn0-531题库demo的问题和答案, 相信你就会知道这个题库的质量了。

jn0-531题库由多位IT认证的专家亲自整理的考试全真试题材料，为了让大家花更少的时间来完成Juniper Networks jn0-531考试. examsoon考题大师jn0-531试题都是考试原题的完美组合，覆盖率95％以上，答案由多位专业资深讲师原版破解得出，正确率100％，只要您使用本站的考试题库参加jn0-531考试，我们保证您一次轻松通过考试；

jn0-531题库问题与答案赏析

　
　
Exam : Juniper JN0-531
Title : Juniper FWV, Specailist(JNCIS-FWV)

1. Which three OSPF parameters are interface parameters? (Choose three.)
A. cost
B. priority
C. neighbor list
D. summarization
E. advertise default route
Answer: ABC

2. Click the Exhibit button.
In the exhibit, what is the address of the multicast receiver?
A. 234.9.8.42
B. 192.168.10.2
C. 192.168.20.10
D. 192.168.20.200
Answer: D

3. Click the Exhibit button.
In the exhibit, which two can be determined about the VPN? (Choose two.)
A. NAT-traversal is enabled.
B. The rekey interval is 8 hours.
C. This device initiated the Phase 1 negotiations.
D. The certificate used in this exchange is set to never expire.
Answer: BC

4. Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D

5. Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C

6. Click the Exhibit button.
In the exhibit, the firewall administrator at the Storefront is complaining that when the communication to the DataCenter1 fails, the preexisting transfers and applications are dropped when the traffic is switched to DataCenter2.
Which statement explains this behavior?
A. SYN checking is enabled in the tunnel.
B. The weight value for the DataCenter2 is too high.
C. VPN monitor is misconfigured in the DataCenter2.
D. Phase 1 and Phase 2 negotiations to DataCenter2 did not occur on time.
Answer: A

7. You have entered the command
set ffilter src-ip 1.1.7.250 dst-ip 10.1.10.5 ip-prot 6
What will be the resulting output in the debug for which this was created?
A. If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has TCP as its protocol then it will be captured
B. If the packet has a src-ip of 1.1.7.250 or a dst-ip of 10.1.10.5 or has UDP as its protocol then it will be captured
C. If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has TCP as its protocol then it will be captured
D. If the packet has a src-ip of 1.1.7.250 and a dst-ip of 10.1.10.5 and has UDP as its protocol then it will be captured
Answer: C

8. Review the exhibit.
Which two of the following elements must be configured on the ScreenOS device in order to support PIM-SM? (Choose two)
A. A multicast control policy
B. A bootstrap router process
C. A unicast routing protocol
D. A static RP
Answer: AC

9. You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone and a set of policies.
Answer: BD

10. Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B

11. Which commands would you use to create a zone and make it ready to perform IP classification for a VSYS?
A. set zone name Zone1
set zone Zone1 ip-classification
B. set zone name Zone1 shared
set zone Zone1 ip-classification
C. set zone name Zone1
set zone Zone1 shared
set zone Zone1 ip-classification
D. set zone name Zone1
set zone Zone1 shared
set zone Zone1 ip-classification enable
Answer: C

12. To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD

13. Click the Exhibit button.
Review the exhibit. Track-ip has failed on the device, but the device did not fail over to the second unit in the cluster:
Why has failover not occurred?
A. The physical interfaces have not failed.
B. The track-ip interval is not sufficient to cause failover.
C. The track-ip address weight is not sufficient to cause failover.
D. The track-ip address threshold is not sufficient to cause failover.
Answer: C

14. Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D

免费下载jn0-531认证考题Demo

免费下载jn0-531 PDF题库